No drawings found.
* Last version maybe changed.

Generators Assembly 318-5148 Generator AR(Caterpillar SR4B general generator)

Part NO. 318-5148
Name Generator AR
Section Generators
Modifier -
SNP GS7 IESCN SEBP67010538
Updated 2018-08-20
Stock China GuangZhou
Accept Payment T/T, Western Union, Alipay, Paypal, L/C
Shipping Method Sea, Air or DHL/FEDEX/TNT/EMS

KPM Parts have excellent quality Guarantee.

CAT SR4B Generators 318-5148 Assembly

318-5148 Generator AR , S/N 6SN765-UP, 60-HERTZ. 480-VOLT
Model: Caterpillar SR4B
Catalog: General Generator
Section: Generators

Grp. Ref. Part NO. Name Modify Note Comments Quantity Maint
225-3224 225-3224 FILM-WARNING AUTOMATIC Engine START 2 N
229-5047 229-5047 FILM-WARNING SHOCK HAZARD, Read OMM 2 N
7B-3028 7B-3028 SCREW-DRIVE NO 4X 3/16-IN 2 N
115-5852 115-5852 Plate & Film GP ENGINE INFORMATION 1 N
233-6084 233-6084 FILM-WARNING FIRE, Stop ENGINE, DO Not OPEN 2 N
308-4479 308-4479 FILM-WARNING NO WELD, Read OMM 2 N
S: GS7 / GS7 (1 ~ 99999)
: : (INCLUDES End STOP, DIVIDERS, Terminal BLOCKS, JUMPERS, TOOL, Fuses & PLUGS) : : S/N 6SN1-UP : Contact Your Local DEALER. : Install ON RH Side OF Generator Barrel AT Front Using 2K-3219 Drive Screws TO INSTALL. : S/N 6SN1-UP : S/N 6SN1-UP : Install Inside OF Generator Housing ON Panel Next TO Space Heater Terminal STRIP. : S/N 6SN1-UP : Install ON Generator Front Panel Assembly ON RH Side OF PACKAGE, Next TO Generator Information PLATE. : S/N 6SN1-UP : Install Film ON The RH Side OF The Generator BARREL, Centered From Front TO BACK, APPROX. 100MM Down From The Center Line AT The Top OF The GENERATOR. : Install Film ON The Barrel Cover IF AVAILABLE. : Install Clear Laminate Over FILM. : S/N 6SN1-UP : Install One Film ON The RH And LH Sides OF The Generator Terminal BOX, Centered Directly Below The Shock Warning LABEL. : S/N 6SN1-UP : Install One Film ON Each Side OF The Generator BARREL, Directly ON The Generator BARREL, Not ON The Barrel COVER. : IF There IS NO Barrel COVER, Center Films ON Each Side The Barrel From Front TO REAR, And ON The RH SIDE, Center Film Below The 118-8452 Glps Generator Info FILM. : S/N 6SN1-UP : Install Near Generator Ground Bolt OR Generator Ground Customer Connection POINT. : S/N 6SN1-UP : Install One Film ON The RH And LH Sides OF The Generator Terminal BOX, Centered Directly Below The Cat Power Edge LABEL. : S/N 6SN1-UP : Install Film ON The Rear Panel OF The Generator Terminal BOX, Centered AT The Top OF The Rear PANEL. : S/N 6SN1-UP : Install One Film ON The RH & LH Side OF The Generator Terminal BOX, AT The Top LH Corner OF The Terminal BOX. Align Each Film With The Edges OF The Terminal Box COVER. : S/N S2A1-UP; S2B1-UP : Contact Your Local DEALER. : Reflatten After STAMPING. : Install ON LH Side OF Block Near Rear Face ON Camshaft Compartment Using 7B-3028 Drive SCREWS. : Stamp Serial Number IN Block Just Below Plate IN Figures 6 HIGH. : S/N S2A1-UP; S2B1-UP : S/N S2A1-UP; S2B1-UP : Install Film ON The Top OF The Oil Fill Cap Centered Between The Handle And The Top Edge OF The Oil Fill CAP. : S/N S2A1-UP; S2B1-UP : Contact Your Local DEALER. : Install Film ON The LH, FRONT, Lower Head Face OF The Block Between CYL. #2 And The Front HOUSING, Readable From The Rear OF ENGINE. : Install Clear Laminate Over FILM. : S/N S2A1-UP; S2B1-UP : Install One Film ON The RH & LH Sides OF The Engine ON The First Visible Crankcase Cover Nearest The Centerline OF The Engine Visible From The Side OF The ENGINE. DO Not Install ON The Explosion Relief VALVES. : S/N S2A1-UP; S2B1-UP : Install Film ON The LH Cam Gear Cover IN A Visible LOCATION. IF That Cover IS Not Available Move TO The RH Cam Gear COVER. : S/N S2A1-UP; S2B1-UP : Install One Plate ON The RH Rear Cam Cover And One ON The LH Front Cam Cover Visible From The Side OF The ENGINE. : IF These Locations Are Not VISIBLE, Move Plates TO The First Available Cam Cover Visible From The Side OF The ENGINE. : S/N S2A1-UP; S2B1-UP : Install One Film ON Each Side OF The ENGINE, One Film ON The Power Distribution Box Visible From The Right Side OF The ENGINE, And One Film ON The Opposite Side OF The ENGINE, Centered ON The First Visible Side Cover Form The Rear OF The ENGINE. : IF There IS Not Power Distribution BOX, Install Both Films ON The First Visible Side Cover From The REAR. : S/N S2A1-UP; S2B1-UP : Install Film AT The Base OF The Dipstick ON The FLANGE. Y: Separate Illustration

*Assembly 318-5148 Generator AR Suitable for SR4B General Generator Generators
*Original 318-5148 Assembly contains Regular Invoice included, After-sales service is provided by the official.
*Used 318-5148 Assembly offer Customs Invoice, After-sales service is provided.
*All Taxes included, no more extra fee.
*Shipping country: Asia China SZ / US(depends on local tax rate,effectiveness/tax rate will be prioritized).

KPM Parts have professional services.

KPM Parts global.